shrinkages
英
美
(shrinkage 的复数) n. 收缩, 收缩量, 减低
[化] 起皱; 收缩; 收缩量
shrinkage的复数
双语例句
- Testing method for drying and firing shrinkages of ceramic whiteware clays
陶瓷用粘土干燥收缩率和烧成收缩率测定方法 - The shrinkages of green bodies in X, Y, Z directions were measured. The results show that under the same pressure, there is no difference of shrinkage in X and Y directions, and does not change with the height.
结果表明，同一压力下，坯体X向和Y向收缩率一致，并且不同高度处的X、Y向收缩率无明显差异。 - The design of a vertical die casting machine rotor is most important to improve the quality of the rotor, traditional rotor castings have many shrinkages such as dispersed organization, bad compaction degree, large blowholes.
电机转子立式压铸机压铸模具的设计制造是保证电机转子品质至关重要的环节，传统工艺生产的电机转子铸件存在着组织疏松、密实度差、气孔多而大等缺陷，影响着电机的各种态势性能； - Proceeded research to the workability, mechanical property and frost resistance of concrete using the method of orthogonal test, furthermore, carried on experiment for permeability resistance 、 wear-resisting property and drying shrinkages between fly ash concrete and only mixing admixtures concrete.
采用正交试验的方法对混凝土和易性、力学性能、抗冻性进行研究，并开展粉煤灰混凝土与只掺减水剂混凝土的抗渗性能、干缩性能、耐磨性能试验。 - During the solidification of ductile iron, the volume change can be separated into several stages: after molten iron poured, shrinkages occur along with the temperature descent;
球墨铸铁凝固过程中的体积变化可以分成如下几个阶段：浇注后，铁水随温度的下降，发生液态收缩； - The research of early age shrinkages of concrete is very important for the solutions of early age cracking of concrete engineering, especially for high performance concrete.
研究早龄期收缩对于解决混凝土工程，尤其是高性能混凝土的早期开裂具有重要意义。 - On the one hand, casting shrinkages at different positions of the blade are considered as nonlinear thermo-mechanical casting deformations that are calculated with accuracy by finite element analysis.
一方面，基于叶片收缩变形位移场的有限元仿真结果，更为准确地计算铸件不同部位的收缩率； - The full sintered Y-TZP had excellent mechanical properties, with bending strength of 710 MPa, fracture toughness of 4.77 MPa · m 1/ 2. During full sintering process, the shrinkages of dental crown in different spatial dimensions were equality and uniformity.
完全烧结的陶瓷材料机械性能优良，弯曲强度达到710MPa，断裂韧性达到4.77MPa·m1/2。在完全烧结过程中，各个方向收缩均匀一致。 - The influences of initial temperatures and the sizes of clusters on the coalescence were revealed by calculating the shrinkages and aspect ratios and by tracking the snapshots of the system configures.
通过对并合体系的收缩因子、纵横比率计算，以及体系构型的跟踪记录，揭示了团簇的初始温度和团簇的尺寸对并合过程影响的一般规律。 - The shrinkages of juvenile wood are higher than that of mature wood.
而幼龄材全缩率高于成熟材。